Britain’s bespoke manufacturer

0300 373 2447
Vulcan Jewellery Send us a job

Vulcan Jewellery · 0300 373 2447 · info@vulcanjewellery.com · https://www.vulcanjewellery.com/guides/wedding-band-patterns/

All guides

Patterns VP1 to VP12.

Twelve patterns, each cut free of charge. Not every pattern suits every profile or width, so the table below gives both for each one.

Which pattern, on which band

Cut free of charge

Find the profile along the top and read down for the patterns it takes, then check the width on the right. Quote the VP code in your enquiry and we cut the pattern at no extra cost. A pattern that needs a flat face will not sit on a traditional court.

Wedding band patterns VP1 to VP12: the profiles each can be cut on, and the widths available.
Pattern D Shape Trad. Court Flat Court Flat Soft Court Widths, mm
VP1 Yes Yes Yes Yes Yes 3/4/5/6
VP2 No No Yes Yes No 4/5/6
VP3 No Yes Yes Yes Yes 3/4/5/6
VP4 Yes Yes Yes Yes Yes 3/4/5/6
VP5 Yes Yes Yes Yes Yes 3/4/5/6
VP6 No No Yes Yes No 4/5/6
VP7 No No Yes Yes No 4/5/6
VP8 No No Yes Yes No 3/4/5/6
VP9 Yes Yes Yes Yes Yes 3/4/5/6
VP10 No No Yes Yes No 4/5/6
VP11 Yes Yes Yes Yes Yes 4/5/6
VP12 Yes Yes Yes Yes No 3/4/5/6

The twelve

  • VP1

    3/4/5/6 mm

    Pattern VP1, cut into a wedding band.

  • VP2

    4/5/6 mm

    Pattern VP2, cut into a wedding band.

  • VP3

    3/4/5/6 mm

    Pattern VP3, cut into a wedding band.

  • VP4

    3/4/5/6 mm

    Pattern VP4, cut into a wedding band.

  • VP5

    3/4/5/6 mm

    Pattern VP5, cut into a wedding band.

  • VP6

    4/5/6 mm

    Pattern VP6, cut into a wedding band.

  • VP7

    4/5/6 mm

    Pattern VP7, cut into a wedding band.

  • VP8

    3/4/5/6 mm

    Pattern VP8, cut into a wedding band.

  • VP9

    3/4/5/6 mm

    Pattern VP9, cut into a wedding band.

  • VP10

    4/5/6 mm

    Pattern VP10, cut into a wedding band.

  • VP11

    4/5/6 mm

    Pattern VP11, cut into a wedding band.

  • VP12

    3/4/5/6 mm

    Pattern VP12, cut into a wedding band.

The artwork above is 300px square, which is the original we hold rather than a reduction. If you need a pattern at press size, ask and we will send the file.

Ready to send the job?

Send us the VP code with the profile, width, finger size and metal, and we come back with a quote and a date.

Send us the job 0300 373 2447

The other guides

Free to use no sign-in

Looking for a figure that is not here? Call the workshop on 0300 373 2447 and we will find it for you.